OBDSTAR BT06 Step-by-step Use Guide
Here comes a use guide about OBDSTAR BT06 Car Battery Tester. Here we go. Connect OBDSTAR BT06 tester with the battery Put the red and black clamp to the battery to be tested. Red clamp for positive, black clamp for negative. It will show start-up interface on the screen. The voltage of the battery to be tested should be lower than 6.0 V or the normal test is unable to proceed; Press OK to continue. According to the prompt of the device, select in proper order Step1: Choose the testing state It refers to if the battery is inside the vehicle with load connected. If so, choose [Inside vehicle]. If not, choose [outside vehicle]. Step2: Choose charge state It refers to if the charge of the battery is finished. If so, choose [After charge]. If not, choose [Before charge]. Step3: Choose battery type It refers to the battery type. Choose [Normal battery] in general. [Before charge]. Step4:Choose input standard It refers to ...